. www.perkinelmer.com/opto pe500df and PE500DUV cermax ? xenon arc lamps datasheet lighting imaging telecom cermax ? xenon arc lamps applications ? medical and industrial fiber optic illu- minators ? machine vision ? infrared and visible spotlights/beacons ? spectroscopy ? microscopy ? uv curing ? video projection description the cermax? xenon arc lamp is an innova- tive lamp design in the specialty lighting industry. these lamps were introduced in the early 1980?s and are now used in endo- scopes in most major hospitals worldwide, in high brightness projection display sys- tems, and for a wide variety of other high performance applications. the pe500df and PE500DUV cermax? lamps have an integrated parabolic reflector, enabling high intensity, focused output of ultraviolet, visible, and infrared radiation. with their internal reflector and rugged ceramic body construction, cermax? lamps are the safest and most compact alternative to conventional quartz xenon lamps. this makes them ideal for applications that require a high degree of illumination control. current-regulated or power-regulated power supplies with output ripples of less than 5% are recommended. single shot ignition pulses are advised because radio frequency starters may damage the lamps internal reflector. in addition to lamps, perkinelmer optoelectronics manufactures cermax? arc lamp power supplies, lamp holders, oem lighting systems, and fiber optic light sources.
perkinelmer welcomes inquiries about special lamps. we would be pleased to discuss the requirements of your application and th e feasibility of designing a lamp specifically suited to your needs. for more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto. all values are nominal; specifications subject to change without notice. ? 2000 perkinelmer inc. all rights reserved. . www.perkinelmer.com/opto usa: perkinelmer optoelectronics 44370 christy st. fremont, ca 94538 phone: (510) 979-6500 fax: (510) 687-1140 toll free: (800) 775-6786 europe: perkinelmer optoelectronics gmbh wenzel-jaksch-str. 31 65199 wiesbaden germany phone: +49 611 492 0 fax: +49 611 492 369 asia: perkinelmer optoelectronics 47 ayer rajah crescent #06-12 singapore 139947 phone: +65 775 2022 fax: +65 775 1008 description nominal range power 500 watts 340-575 watts current 27 amps (dc) 20-32 amps (dc) operating voltage 18.5 volts (dc) 16-21 volts (dc) ignition voltage 35 kilovolts (recommended minimum) temperature 150o c (maximum) lifetime* 1000 hours (500 hour warranty) * end of lamp life is defined as 50% of initial output. operational specifications output at nominal power pe500df and PE500DUV physical specifications description specification arc gap .09 inch (2.28mm) reflector geometry parabolic y 2 = 0.8 x (inch) weight 664 grams window diameter 2 inch (50.8 mm) focused output at f/1.0 lens description visible output total output* 6mm aperture 5200 lumens 48 watts 8mm aperture 2300 lumens 22 watts * nominal values at 500 watts after 2 hour burn-in. f= uv filtered output/ uv = uv enhanced output description peak intensity radiant output* uv output* ir output* visible output* color temperature peak instabilities beam geometry** *these values indicate total output in all directions. wavelengths = uv<390nm, ir>770nm, visible 390nm to 770nm. ** beam geometry defined as half angle at 10% pts after 01/100/1000 hours. notes 1. lamp must not be operated with window facing upwards within 45o of vertical. 2. seal temperature must not exceed 150o c. 3. current/power regulated power supplies and perkinelmer lamp housing units are recommended. 4. lamp must be operated within recommended current and power range. over powering may lead to arc instability, hard starting and premature aging. 5. cermax lamps are much safer lamps to use than their quartz xenon arc lamp equivalents. however, caution must be practiced when operating lamps because they are under high pressure, require high voltage, reach temperatures up to 200o c, and their ir and uv radiation can cause skin burns and eye damage. read hazard sheet included with each lamp shipment. dimensions dimensions in parentheses are in millimeters. x y focal point cathode 8-32 unc 2b x .25 dp 3 holes eq sp on a 1.60 (40.64) bc .20 (5.08) .066 (1.52) 2.592 (65.84) 2.858 (72.59) .273 (6.93) 2 x .60 (15.2) 2.00 (50.8) .04 (1.02) .250 (6.35) 2.00 (50.8) .22 (5.59) PE500DUV 17x10 5 candelas 112 watts 11.5 watts 62 watts 9600 lumens 5050 kelvin 4% 3o/4o/5o pe500df 24x10 5 candelas 112 watts 5.5 watts 65 watts 10500 lumens 5600 kelvin 4% 3o/4o/5o spectral output relative output f uv f + hot mirror wavelength (nm) 200 300 400 500 600 700 800 900 1000 1100 100 80 40 20 0 60 ds-157 rev c 1101
|
